122 Downloads
Download Site1
|
| Download time: |
| Dialup | (56k) | - | 01 m 15 s |
| ISDN | (128k) | - | 33 s |
| DSL | (512k) | - | 09 s |
| Cable | (1024k) | - | 05 s |
| T1 | (1484k) | - | 03 s |
|
|
|
Description of LITIO - 3D Sheet metal unfolding software
LITIO is a sheet metal program that calculates flat (unfolded) sheet development of ducts, rectangle to round transitions, cylinders, cones, pipe intersections, connections, bifurcations, elbows, etc.
For HVAC, hoppers, cyclones, dust extraction, ducts, conveying systems, silos, piping, etc.
To draw your sheet metal developments directly in AutoCAD R2000 and later (no need of DXF convertions).
Steps of use:
First select the 3D surface you want to unfold.
(You can select: either inside, outside, or mid cross sectional dimensions and/or height specifications; to draw or not the 3D surface, and the unfolded sheet as a mesh [to help you when bending the sheet] or as 2D contour [to ease cutting]; the precision of the calculation of the developments).
Metric Units/Imperial units: the program automatically sets the units according to the units used
in the current drawing session.
After finishing the input of parameters, the program draws the 3D object and the respective
development.
Afterwards, you can use the 2D developments for CAM cutting (plasma, laser, etc.) or manual
cutting, by plotting them 1 to 1 (1 d.u. = 1 mm or 1 d.u. = 1 inch), and using them to mark
sheet and cut.
Tags: 3d, Abwicklung, Autocad, Bend, Bender, Blech, Desarrollo, Development, Duct, Fittings |
|
| Similar software |
|
|
| Sheet Lightning is a specialised engineering 2D/3D CAD System for creating and unfolding sheet metal designs for fabrication or manufacture. It handles cylinders, cones, square-to-round adapters, ovals, intersections and mutli-intersections. |
| Type:Shareware
|
 |
|
|
|
| KzxMetal is a multi- function shop math utility program for all your sheet metal math needs, calculate the flat size of any part, trigonometric functions, counterSink hole size calculator, tube flat size, Inch to millimeter or millimeter to inch +++ |
| Type:Demo
|
|
|
|
|
| This software was made for Metal Detector users by Metal Detector users! The programmer contacted over 100 metal detector users and asked them what features they wanted in a computer program for their hobby, and this product is the end result. |
| Type:Shareware
|
|
|
|
|
| Mobi3D program is used for 3D furniture designing for manufacturers of furniture and other products made from sheet materials (wood, metal, glass, etc ..), whose product range is wide or permanently changing |
| Type:Demo
|
|
|
|
|
| Cutting Optimization Pro is a computer program used for obtaining optimal cutting layouts for one (1D) and two (2D) dimensional pieces. The software also lets you to define and handle complex products, such as table, desk, cupboard, locker, etc. |
| Type:Shareware
|
|
|
|
